Marmo Meccanica - LCV 711M

The LCV machine is a polishing unit for straight flat-squared 1 to 6 cm thick marble or granite edges. The working mode is on a continuous process basis; this means that all the pieces are loaded one after the other on the machine, and move past a series of mandrels so that they come out completely finished. In the LCV the marble and granite pieces are placed vertically as they are usually handled, and it is this system that, beside avoiding possible breaks of the material, reduces machine cluttering and also the area necessary for the operation. Moreover the LCV does not require either foundations or special inclination for water discharge. In fact, it can simply be placed on the ground and as it is completely streamlined, the discharged water can be easily directed to a point at some distance, by means of a hose connected to a special drain.

It is possible to have the LCV 711 M fitted with a calibrating-dripstone mandrel or a shaping dripstone mandrel.

Marmo Meccanica LCV 711 M-SE/SU with ingoing sizing-drip mandrel

Marmo Meccanica LCV 711 M-SU with outgoing shaping-drip mandrel

Marmo Meccanica LCV 711 M-SE with ingoing sizing-drip mandrel

ADVANTAGES OF THE LCV-711M
• Fully automatic straight edge polishing
• Production speeds of 80 to 150 l/f per hour
• No height restrictions for material being processed
• 7 polishing heads enables processing in one pass
• Requires small foot print for set up and operation. (Dimensions are 14’x4’)
• The LCV 711 requires no human intervention to over see the operation and allows the operator to do other jobs
• Cost of lineal feet of finished edge amortized over 5 years is under .30 per foot
• Over 3,000 LCV 711 machines in operation throughout the world
• Machine has been in operation since 1982

SPECIFICATIONS OF THE LCV-711M
• Number of Polishing Motors: 7
• Number of Beveling Motors: 2
• Total Water Consumption: 12 to 15 gallons/minute
• Total Power Requirement: 230v/3phase/60amps
• Total Dimension of Machine: 10ft x 4ft x 4ft
• Total Weight of Machine: 3,000lbs
• Extension Tables: Standard 3ft in length
• Working Speed: 150 Lineal feet per Hour
• Maximum Abrasive Size: 6" or 150mm
• Minimum material size: 3 inches x 16 inches (shorter pieces possible like 12" x 12" tile, contact us for details)
• Maximum material size: NO MAXIMUM

If you have any specific questions about this product or would like a quote, please contact Paolo on e-mail  paolo@intelpowerinc.ca or call (647) 212 0056 at any time.